Yes. It is assumed to be in a correct mode.
what you need to is just type without mode.
example:
RouterA(config)#interface ethernet 0
all you need to type is interface ethernet 0.
jeongwoo
------Original Message------
From: "praveen walia" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: June 21, 2000 11:54:05 PM GMT
Subject: Re: ACRC Survey
hi group,
hope it is not true because i skipped the survey and went straight to the
exam!
maybe thats why i failed . i was reallywell prepared got 768! studied 4 mos
for this exam. have 1.5 yrs cisco exp also.
Ques: when answering fill-in command q's,can you assume to be in correct
config mode?
praveen
Equant
[EMAIL PROTECTED]
"Tim Roberts" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> I sat the ACRC exam today. I had to take a survey before I began the
> exam. It said that this info will be used to factor(grade) the exam.
> What
> is up with this?
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
........................................................
iWon.com http://www.iwon.com why wouldn't you?
........................................................
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
