This is usually a circuit problem somewhere along the path, but I've also
seen where a bad switch port will cause problems. If the circuit tests fine
with all patterns over an hour's time, I'd ask the carrier to try swapping
ports to see if things change.
- Don
-----Original Message-----
From: Stull, Cory [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 09, 2000 2:13 PM
To: [EMAIL PROTECTED]
Subject: frame-relay CRC
What would cause a frame-relay CRC?
Rx CRC Exceptions Hour Day
#Frames %Max Hour Thresh 05 Wed 2523 13.0028 0.0100 21 Thu 3065 6.3095
0.0100
I logged into AT&Ts web site to look at a companies frame-relay statistics
that is having problems and they are receiving CRC errors at the frame
switch.. Could someone please tell me what would cause this?
Thanks
Cory R. Stull
MCSE, Bay Router Specialist, CCNA,CCDA
Communications Concepts Unlimited
262-814-7214
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
*****************************************************************************
The information in this email is confidential and may be legally privileged.
It is intended solely for the addressee. Access to this email by anyone else
is unauthorized.
If you are not the intended recipient, any disclosure, copying, distribution
or any action taken or omitted to be taken in reliance on it, is prohibited
and may be unlawful. When addressed to our clients any opinions or advice
contained in this email are subject to the terms and conditions expressed in
the governing KPMG client engagement letter.
*****************************************************************************
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
