For Cat 5500 console (Only for Sup III) , you should use a straight-ahead
cable. Not rollover cable.
For 6500 , I think it's rollover .
Henrique Issamu Terada
CPM Comunica��es - Brazil
CCNA Certified
----- Original Message -----
From: Cisco Wave <[EMAIL PROTECTED]>
To: Cisco Group Study <[EMAIL PROTECTED]>
Sent: Thursday, June 22, 2000 9:54 PM
Subject: Console Connection for Cat5500-Sup3 and Cat6500-Sup1
> Dear All,
>
> It seems that our cabling group has some issues
> connecting the new Cat5500-Sup3 and Cat6500-Sup1
> to our Terminal Server.
> The Terminal Server is a Nortel/Bay Networks Annex
> 4000.
> The previous connections from that Terminal Server to
> Cat5500-Sup1&2 are working fine,
> but somehow they can't make it work for these new
> following modules :
> Catalyst 6500 Series, Supervisor 1 module
> (WS-X6K-SUP1A-2GE)
> Catalyst 5500 Series, Supervisor 3 module with NFFC 2
> (WS-X5530-E3)
>
> I gave them the console pinout from the Cisco web
> site, as an example :
>
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/hardware/supervi
s/0acabsps.htm#20178
>
> Anybody has experienced this before ? I know the
> module are working fime cause I can log in via a
> laptop.
> I know the TS is working fine too, because I can
> connect to other module. What is wrong then ?
>
> Thanks for your support.
>
>
>
>
> =====
> We are NOT Cisco Inc.
>
> __________________________________________________
> Do You Yahoo!?
> Get Yahoo! Mail - Free email you can access from anywhere!
> http://mail.yahoo.com/
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
