Also you can use floating static routes on the router for when the traffic
that is
defaultly going thru one T1 and fails and you want it to go thru the other
T1
that's up and running.....You can also load balance with EIGRP also.....
Joe
Senior Network / Systems Engineer
CCNA
"Joseph J Szczepanski" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> SH -
> What does the current setup look like? What type of routing is currently
> being used? For instance, if you are running ospf, most of this is
already
> taken care of for you. If you running static routes, you will need to do
> some work, but not much.
>
> Joe
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> SH Wesson
> Sent: Wednesday, June 21, 2000 12:08 PM
> To: [EMAIL PROTECTED]
> Subject: two T1s
>
>
> I'm at one location with two T1s to corporate. How can I configure these
> two T1s to load balance each other, provide redundancy for each other etc.
> For instance, if one T1 goes down, all traffic that normally goes through
> that T1 would now be re-routed to the other T1 which is up. Also is there
a
> way to sort of multiplex or in Catalyst switch term port-channel, so that
> these two T1s can be load balancing and redundant.
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
