No you simply need to type Term mon (Terminal Monitor) at the command prompt
on the line you are telnetting into.
You also need to set debuggin console to on.
-----Original Message-----
From: Omer [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 27, 2000 9:49 PM
To: Cisco Group Study
Subject: No debug over telnet
Hello,
I have noticed that although I can turn debugging on over a telnet
connection, I cannot watch the debug information over a
telnet connection to the router. I deduced that if you want to debug
activities on the router you have to connect to it
through the console port. If that is not true please let me know.
Omer
_____NetZero Free Internet Access and Email______
http://www.netzero.net/download/index.html
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
