okay, here's what ya do:
issue a break on the bootup
do a:
confreg 0x3920
and restart the router.
change your hyperterminal settings to 115,200bps. reconnect to the router
(disconnect and reconnect with the toolbuttons)
use the xmodem command on the router and upload the IOS through the console
port
-Brad
""Brad Ellis"" <[EMAIL PROTECTED]> wrote in message
8jd3qu$q3j$[EMAIL PROTECTED]">news:8jd3qu$q3j$[EMAIL PROTECTED]...
> It's broke. Send it to me, I'll give you $200 for it.
>
> lol
> -Brad
> ""Palikhey, Niraj"" <[EMAIL PROTECTED]> wrote in message
> 9FAB5E2F32B2D31187E4009027468CA79E0B77@WAXSNA-USDC-3">news:9FAB5E2F32B2D31187E4009027468CA79E0B77@WAXSNA-USDC-3...
> > Hi,
> > I am getting an error msg. when my 3600 router boots up. The error msg.
> > reads:
> > device: does not contain a valid magic number
> > boot: cannot open file "flash:"
> > boot: cannot determine first file name on device flash
> >
> > Then it takes me to the rommon > prompt.
> > Then I typed in confreg and tried to get into the router by bypassing
the
> > NVRAM, but once it reloads, it takes me back to the rommon > prompt.
> >
> > Can someone please advise.
> > Thank you.
> > Kind regards,
> > [EMAIL PROTECTED]
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > ---
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
