Hi:
Do you have logging buffered turn on in the router config? The alarms will be issue to Spectrum depending on the traps you have set up and or enabled (ie. snmp, isdn call-information, config,etc.). Depending on how the routers are connected to each other, if a main interface supplying a T1 feed to several centres goes flapping ; you will see alarms from each of those centres because spectrum realized that the end devices are no longer responding to ICMP. Spectrum will use the "Primary Address" in the model when issueing a fault.
Hope this helps.
David Luong
CCNP,CCNA,Network+,A+,i-Net+
Telecommunications Analyst
Insurance Corporation of B.C.
Vancouver, B.C CANADA
-----Original Message-----
From: Ben Tang [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 28, 2000 8:47 AM
To: '[EMAIL PROTECTED]'
Subject: ospf reconvergence issue .
HI , all :
I have a ospf area 0 which has area 100 .
area 100 has several routers monitord by spetrum and remedy .
The problem is when a interface of the routers change status , all routers
creat a ticket annoucing lost contact .
And even the routers using static route in the same subnet lost contact .
But in the router's log, there are no event logged .
Why ?
When the router recaculate the route table , will the route unaffected still
working ?
thanks
Ben Tang
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
