MRTG should work fine as long as the counters don't roll over too fast. You
can tell MRTG to update every 60 seconds instead of the default 300 if you
need to. There are others packages out there but I believe they all depend
on the same counters....plus you just have to love MRTG!
Daniel
-----Original Message-----
From: kaushik khakhar
To: [EMAIL PROTECTED]
Sent: 6/27/00 3:17 AM
Subject: LAN Monitoring-Help!!!
Hi Group,
In a LAN environment, we have Cisco Works and few Cisco switches with
10/100
Mbps and Gbps ports. I want to monitor them simultaneously for traffic
on
each port. I am aware of MRTG too, but dont know whether it will
monitor
Gbit port?
question is:
1. How to monitor Gigabit port?
2. How to monitor Mbps and Gigabit port simultaneously?
Kindly extend your help. Do I need to use some other tool??
Thanks and Regards,
Kaushik
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
