It makes sense. So it means I need a router with two serial interfaces...
Thanks,
Billy
<[EMAIL PROTECTED]> wrote in message
1F5939AED2D5D31195790008C7914978D17BB1@CHS024">news:1F5939AED2D5D31195790008C7914978D17BB1@CHS024...
> you need to switch it to anothet interface to transfer the dlci...
> u need an input and output port for a frame switch
>
> -----Original Message-----
> From: Billy Monroe [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, June 29, 2000 2:59 PM
> To: [EMAIL PROTECTED]
> Subject: Frame-Relay using two routers
>
>
> Sorry I know this question has been discussed before but I couldn't find
the
> e-mail regarding this one...
>
> I have two routers (Router1 is the DCE) and when I configure Router1 as a
> switch it returns the message '**Can not switch on same interface'.
> Can you tell me why is not working ?
>
> Here is the configuration:
>
> !
> hostname fakeswitch
> !
> frame-relay switching
> int s0
> no ip address
> encap frame-relay
> clockrate 38400
> frame-relay lmi-type ansi
> frame-relay intf-type dce
> frame-relay route 100 int serial0 135
> ** can not switch on same interface
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
