Be careful with those ports. They are easily exploitable in the MS
environment.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 29, 2000 2:31 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: Microsoft Networking over WAN
TCP 137
UDP 138
TCP 139 would be required for ms networking
you may also need ip helper-address and ip forward protocol udp if you are
doing DHCP across the wan.
Cheers,Padhu
-----Original Message-----
From: Michael Linehan [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 29, 2000 1:18 PM
To: CiscoStudyGroup
Subject: Microsoft Networking over WAN
Could someone please give me the required ports that need to be open so
I can map drives, and login to a NT Server? Also is there anything else
I should know about doing Microsoft Networking over a Cisco Router WAN
connection?
Thanks.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]