well I haven't tried it, but you try it and let me know. use annex D and
rfc1490 at Motorola (vanguard) end, & ietf(encap) and ansi (lmi) at Cisco
end.
Swapnil Jain
(CNE, MCSE, CCNA)
ICQ# 45074571
----- Original Message -----
From: Olden Pieterse <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, July 03, 2000 8:22 PM
Subject: Motorola & Cisco Frame Relay
> Hi there gang
>
> Has anyone done this ? Configuring Cisco & Motorola Frame Relay without
> getting encapsulation problems ?
> I would appreciate any help !
>
> Cheers
>
> Olden Pieterse
> MCP , CCNA , BCMSN , BSCN , BCRAN
> Brainbench Certified CISCO Network Implementation Specialist
> Technical Consultant
> Mobile : +27 82 410 8621
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]