Yes it does. You will need to use an IOS PLUS image that supports ISL or
802.1Q encapsulation. Don't forget to configure sub-interfaces.
Good luck...
Parrish.
Federico Díaz Herrera <[EMAIL PROTECTED]> wrote in message
86D5B070C6E7D211AFDA00609780B43102C36680@CIDINTEXCHANGE">news:86D5B070C6E7D211AFDA00609780B43102C36680@CIDINTEXCHANGE...
> Hi, only for validate if the fastethernet port of 3640 router support
> trunking with catalyst 2940????
>
> I need a especial IOS????
>
> thanks for yours comments
>
> regards
>
>
> _____________________________
>
> Federico Díaz Herrera
> T E R R A N E T W O R K S M É X I C O
> Networks Engineer
> *email: mailto:[EMAIL PROTECTED]
> *Tel. 528.318.8910
> * FAX. 528.318.8785
> San Pedro Garza García, Mexico
> http://www.brainbench.com/transcript.jsp?pid=805430
> "No amount of magic knobs will save a sloppily designed network"
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
