Actually that depends on why you ended up there in the first place.  If
flash is corrupt, setting the config-register to 0x2102 will do nothing.
You can check the flash from rommon and make sure it is not corrupt. You can
also check the config-register to see what it is set at.  I'm not going to
tell you how so you can figure it out.  Good luck.

Kenny

----- Original Message -----
From: "Jorge Rodriguez" <[EMAIL PROTECTED]>
To: "kenny" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Saturday, July 08, 2000 3:54 PM
Subject: RE: routername(boot)>


> If yopu are in RomMonitor
> type
> Router>o/r0x2102  ENTER and reboot
>
>
> ------Original Message------
> From: "kenny" <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Sent: July 8, 2000 10:23:33 PM GMT
> Subject: routername(boot)>
>
>
> Hi ,
> When router boot up , it show routername(boot)>
> What can i do to make it boot up from flash again ??
>
> Thanks
> ken
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> Jorge Rodriguez /CCNA
> Network Analyst
> R&S Networks Inc
> 1112 Boylston Street
> Suite 222
> Boston, MA 02115
> 1-781-614-1294
> 1-617-989-8634 Evenings
> http://www.netwire.n3.net/
> http://www.learncisco.n3.net/
>
> ........................................................
> iWon.com       http://www.iwon.com     why wouldn't you?
> ........................................................
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>

___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to