For T1 make a cable using cat5 and two RJ45 ends - cross pins 1+2 to pins
4+5 and you've got your T1 crossover.
For 56k CSU/DSUs cross 1+2 and 7+8 if I remember correctly.
Gary Alterson wrote:
> Hello all wiser than I:
>
> If I've got two 2600 series routers, both with the Internal T-1/Frac T-1
> DSU/CSU WIC, what do I need to hook them up to each other back to back? Is
> it just a cable? If so, which kind? Also, can I then channelize the full
> T-1 to decrease the bandwidth available?
>
> Do I use a different cable if I need to hook up to 56k DS0 WICs instead?
>
> Thanks in advance,
> Gary
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]