Please include ur Router configuration,
regard
siddiqu. T
--
T. Mohamed Abubakkar Siddiqu CCNA
---- "Brent Case" <[EMAIL PROTECTED]> wrote:
> I have a 2503 that on every reload, it looks for 4 different type of
> configuration files to load via tftp. How do I turn that off? There
> is a
> valid startup-config but the router constantly looks for network-confg,
> cisconet.cfg, router-confg & ciscortr.cfg, even after completly loading.
> I
> have included the startup messages, show version & show startup-config.
> If
> this is an option set in the boot rom, shouldn't the config register
> be
> something different? Any help would be greatly appreciated!
>
> Thanks,
>
> Brent Case
>
>
> System Bootstrap, Version 4.14(9.1), SOFTWARE
> Copyright (c) 1986-1994 by cisco Systems
> 2500 processor with 4096 Kbytes of main memory
>
> Unknown or ambiguous service arg - udp-small-servers
> Illegal IP keyword - classless
> Loading c2500-j-l_112-13.exe at 0x3000040, size = 7969232 bytes [OK]
>
> F3: 7872580+96620+313640 at 0x3000060
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and Computer
> Software clause at DFARS sec. 252.227-7013.
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California 95134-1706
>
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-J-L), Version 11.2(13), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-1998 by cisco Systems, Inc.
> Compiled Tue 31-Mar-98 12:27 by tlane
> Image text-base: 0x0303F1E4, data-base: 0x00001000
>
> cisco 2500 (68030) processor (revision A) with 4096K/2048K bytes of
> memory.
> Processor board ID 01446664, with hardware revision 00000000
> Bridging software.
> SuperLAT software copyright 1990 by Meridian Technology Corp).
> X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
> TN3270 Emulation software.
> Basic Rate ISDN software, Version 1.0.
> 1 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 1 ISDN Basic Rate interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read ONLY)
>
> Loading network-confg ... [timed out]
>
> Loading cisconet.cfg ... [timed out]
>
> Loading router-confg ... [timed out]
>
> Loading ciscortr.cfg ... [timed out]
>
>
>
> Press RETURN to get started!
>
>
> Router#sho ver
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-J-L), Version 11.2(13), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-1998 by cisco Systems, Inc.
> Compiled Tue 31-Mar-98 12:27 by tlane
> Image text-base: 0x0303F1E4, data-base: 0x00001000
>
> ROM: System Bootstrap, Version 4.14(9.1), SOFTWARE
>
> Router uptime is 8 minutes
> System restarted by power-on
> System image file is "c2500-j-l_112-13.exe", booted via flash
>
> cisco 2500 (68030) processor (revision A) with 4096K/2048K bytes of
> memory.
> Processor board ID 01446664, with hardware revision 00000000
> Bridging software.
> SuperLAT software copyright 1990 by Meridian Technology Corp).
> X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
> TN3270 Emulation software.
> Basic Rate ISDN software, Version 1.0.
> 1 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 1 ISDN Basic Rate interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read ONLY)
>
> Configuration register is 0x2102
>
> Router#
>
> Router#sh startup-config
> Using 574 out of 32762 bytes
> !
> version 11.2
> service config
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname Router
> !
> enable secret 5 $1$TPq9$pVkiL7hW2bXINhzSQxz2D1
> enable password sanfran
> !
> !
> interface Ethernet0
> ip address 192.168.200.101 255.255.255.0
> no cdp enable
> no mop enabled
> !
> interface Serial0
> no ip address
> shutdown
> !
> interface Serial1
> no ip address
> shutdown
> no cdp enable
> !
> interface BRI0
> no ip address
> shutdown
> no cdp enable
> !
> no ip classless
> !
> !
> line con 0
> exec-timeout 0 0
> line aux 0
> line vty 0 4
> password cisco
> login
> !
> end
>
> Router#
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
__________________________________________________
FREE voicemail, email, and fax...all in one place.
Sign Up Now! http://www.onebox.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
