Scott,
What type of switch ports are you connecting to, do they support channeling and
trunking. A show port capabilites will tell you this, if so, turn trunking and
channeling off for these ports.
set trunk mod#/port# off
set port channel mod#/port# off
bpdu-guard enables a port to go into an errdisabled state for a period of time
if this port hears a BPDU. This should never happen on a port with a
workstation attached. Therefore it is a safe guard against cables being moved
around and inadvertantly causing a loop in the network.
Joe
"Chen, Scott" wrote:
> I have spantree enable and portfast enable on ports that
> clients/workstations are connected to. Should I also have "set spantree
> portfast bpdu-guard enable" also and what does that do. The reason I ask is
> because some clients are reporting that their ip address does not renew via
> dhcp automatically and that sometimes they have to go to winipcfg and
> release all and renew to get a new dhcp lease. Thanks.
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
