Hi there
Is there a default route on your router to tell it how to get to the other
side AND back ?
You might have a route one way , but not back .
Remember a ping has to get there and back .
do sh interface
sh frame-relay map
sh frame-relay pvc
That might shed some light !
Hope it helps
Cheers
Olden
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 17, 2000 2:47 PM
To: [EMAIL PROTECTED]
Subject: Help can not ping accross a Frame Relay link
Strange situation I can ping from my router accross a 56K frame link and get
100%, but If I try to ping from a work station I can ping the e0 side of my
router and of course my s0 interface, but not accross the wan link. From the
router I can ping anywhere. What could cause this
problem????????????????????
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]