Other than IOS ver, what feature set are you running? You need a specific
feature set to run NAT.
Wayne Lawson, SE - Cisco Systems
CCIE # 5244, CCNA & CCDA, Nortel NCSE,
MCSE, CNE, CBE, CNX Ethernet
2000 Town Center, Suite 450
Southfield, MI. 48075
248.455.1663 (Direct Voice)
248.709.5797 (Cellular)
248.455.1699 (Fax)
800.365.4578 (Msg. Center)
<http://www.cisco.com>
"EMPOWERING THE
INTERNET GENERATION"
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Gene Park
Sent: Monday, July 17, 2000 3:45 PM
To: [EMAIL PROTECTED]
Subject: NAT Command Question
Quick question for a NAT command.
Whenever I type "ip nat inside source static 10.1.1.1 195.1.1.1"
I have following message error.
% Invalid input detected at '^' marker.
It's committed on global configuration mode.
When I go for ip nat outside on serial face, I have same invalid input
detected message. The IOS is 11.2.
Anybody knows why?
Thanx in advance.
Gene Park
=====
Gene Park
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail – Free email you can access from anywhere!
http://mail.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]