Robert,
Thanks for your input. If we do not use Username & Password, can it restrict
each user only use one channel ?? (The background is I will install a AS5300
to support remote Analog DialIn and ISDN Dialin for public. Suppose everyone
can dial in. )
HC
"McCallum, Robert" wrote:
> You only setup a username and password if you are using pap or chap
> authentication. If you don't use any authentication then no password or
> username is required.
>
> -----Original Message-----
> From: harold chan [mailto:[EMAIL PROTECTED]]
> Sent: 18 July 2000 11:26
> To: [EMAIL PROTECTED]
> Subject: ISDN Dial-IN
>
> Dear all,
>
> When setup ISDN dial in, is it necessary that we need to assign User ID
> and password. Suppose it only support sigle channel BRI.
> Rgds,HC
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
