remember to use the correct x id and sdlc address
-----Original Message-----
From: D. J. Jones [mailto:[EMAIL PROTECTED]]
Sent: 17 July 2000 02:25
To: [EMAIL PROTECTED]
Subject: Re: How to setup the SDLC inetrface vmav&partnet mac address?
Try this link first Andy:
http://www.cisco.com/warp/public/488/39.html
The following link shows a number of STUN, SDLC and SDLLC sampe configs:
http://www.cisco.com/warp/public/488/12.html
Hope you get your issue(s) resolved..dj
""Andy Xing"" <[EMAIL PROTECTED]> wrote in message
8kti31$m6c$[EMAIL PROTECTED]">news:8kti31$m6c$[EMAIL PROTECTED]...
> Hi,
>
> We have tow location ,they use DLSW to comunicate. In our office we have a
> AS400 connected with a Cisco 2501 router by SDLC, in other site they have
a
> AS400 and a Cisco 7500 connected through ethernet.
>
> My question is when I config SDLC interface , how to identify the vmac
and
> partner mac address to correspond to our host or remote host mac address?
>
> Is there anything else should be pay atthention to ?
>
>
> Thanks
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]