Hi,
If I use the sho commands, it is indicating that it is
sup2. But the contract and the module front panel
shows sup1 !
TOKYO-04-01-SW> sho mod
Mod Module-Name Ports Module-Type
Model Serial-Num Status
--- ------------------- ----- ---------------------
--------- --------- -------
1 2 100BaseTX Supervisor
WS-X5509 002259567 ok
2 12 10/100BaseTX Ethernet
WS-X5213A 006598575 ok
3 12 10/100BaseTX Ethernet
WS-X5213A 006600280 ok
5 1 Route Switch
WS-X5302 006591933 ok
Mod MAC-Address(es) Hw
Fw Sw
--- ---------------------------------------- ------
------- ----------------
1 00-e0-fe-fa-38-00 thru 00-e0-fe-fa-3b-ff 1.1
2.2(1) 3.2(5)
2 00-e0-1e-7a-45-24 thru 00-e0-1e-7a-45-2f 2.0
1.4 3.2(5)
3 00-e0-1e-83-84-ec thru 00-e0-1e-83-84-f7 2.0
1.4 3.2(5)
5 00-e0-1e-91-b7-0c thru 00-e0-1e-91-b7-0d 4.0
20.7 11.2(13)P
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
--- -------- --------- ---------- ------
1 EARL 1+ WS-F5511 0002232869 1.0
TOKYO-04-01-SW> sho ver
WS-C5000 Software, Version McpSW: 3.2(5) NmpSW: 3.2(5)
Copyright (c) 1995-1999 by Cisco Systems
NMP S/W compiled on Feb 3 1999, 19:01:27
MCP S/W compiled on Feb 03 1999, 19:04:14
System Bootstrap Version: 2.2(1)
Hardware Version: 1.1 Model: WS-C5000 Serial #:
002259567
Module Ports Model Serial # Hw Fw Fw1
Sw
------ ----- ---------- --------- ------ -------
------- --------------------
1 2 WS-X5509 002259567 1.1 2.2(1)
2.2(1) 3.2(5)
2 12 WS-X5213A 006598575 2.0 1.4
3.2(5)
3 12 WS-X5213A 006600280 2.0 1.4
3.2(5)
5 1 WS-X5302 006591933 4.0 20.7
2.2(4) 11.2(13)P
DRAM FLASH
NVRAM
Module Total Used Free Total Used Free
Total Used Free
------ ------- ------- ------- ------- ------- -------
----- ----- -----
1 16384K 9432K 6952K 8192K 3840K 4352K
256K 117K 139K
Uptime is 139 days, 21 hours, 41 minutes
-----Original Message-----
From: Buddy Venne [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, July 25, 2000 1:44 PM
To: 'Cisco Wave'
Subject: RE: Sup 1 or Sup2 in Cat5xxx ?
Cisco Wave -
do you get this display??
sho mod:
Mod Slot Ports Module-Type Model
Status
--- ---- ----- -------------------------
------------------- --------
1 1 0 Supervisor IIG WS-X5540
ok
sho ver:
Hardware Version: 1.0 Model: WS-C5509 Serial #:
067524265
Mod Port Model Serial # Versions
--- ---- ---------- ---------
----------------------------------------
1 0 WS-X5540 014380356 Hw : 1.1
Fw : 5.1(1)
Fw1: 5.1(1)
Sw : 5.1(2a)
hth
Buddy Venne
WAN/LAN Specialist
Onyx Acceptance
(949) 465-3775
-----Original Message-----
From: Cisco Wave [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 24, 2000 5:37 PM
To: Cisco Group Study
Subject: Sup 1 or Sup2 in Cat5xxx ?
Dear All,
I have a customer who has some cat 5000 with
supervisor.
I am trying to find out if there are supervisor 1 or
2, but it seems tricker than usual.
The maintenace contract shows that the customer did
buy :
Supervisor 1
and Supervisor 2
The switches I am interested in are supposed to have
sup1, according to the contract.
When I look at the actual module, it is labeled
Supervisor with no numbers.
I will imagine it is then supervisor 1, and not
supervisor 2, because sup2 are labeled supervisor II.
However, when I do a 'sho mod' or 'sho ver', the
module comes up as WS-X5509 which is sup2.
This is the confusing part here ...
And the Hardware version shows 1.x, which looks like
sup1 too !
My theory is that the customer did load image CatOS
for sup2, instead of sup1.
Somehow it did work, but it is reporting wrong HW, and
this is why it is showing WS-X5509.
Anybody can help me to find out if they are sup1 or
sup2 ?
Thanks,
=====
We are NOT Cisco Inc.
__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail – Free email you can access from anywhere!
http://mail.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
