> I have a problem when I dial in to a 2610 router; the router has a U.S.
> Robotics modem attached via the console port. Upon dialing in, I get a
> connection but no login prompt. When I telnet in to the router at the same
> time and configure something on the router, the terminal window which I use
> for the dial-up connection logs this action, so it looks like my dial-up
> connection is connected to the router.
> Do you have an idea why I don't get a login prompt ? Here is the output from
> the running configuration:
>
> line con 0
> exec-timeout 3 0
> password 7 0526071D354540
> login
I always have trouble with USR Sporsters unless I specify
`modem autoconfigure type usr_sportster'
Also, you'll probably going to want to specify `modem Dialin'
if you're dialing in to it remotely.
Good luck.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]