You can do "set span" with catalyst 5k. Catalyst 2924 has different
command.. You have to insert following command to the interface, which
your monitor is connected to.
interface fastethernet 0/1
port monitor FastEthernet 0/2
FastEthernet 0/2 is the monitored interface
-Tapani-
Robert Borejszo wrote:
> Hello:
> I am trying to set SPAN on my 2924 switch using command set span ....
> My switch doesn't recognize this command. As matter of fact when I do
> set ?
> the only provided option is <CR>.
>
> What's wrong? I was sure that 2924 can do span.
>
> your help will be appreciated.
> BTW, I am in privileged mode.
>
> Thanks,
> Robert
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
