I suggest placing the command "no exec" on the lines
connected to the other routers. This tells the port
that if it sees a charactor to not try and execute it.
This will cause a port to go off into the ozone. As
for the port, if you do a show line, is there an "*"
next to the line in question? Make sure you are
clearing the correct line. Also try a "disconnect".
William Swedberg CCNP CCDP
--- Cesar D'Suze Scott <[EMAIL PROTECTED]> wrote:
>
> Hi guys..
>
> I have a problem with a 2511 using reverse telnet.
>
> When I want to access the console of some routers,
> one of them (the one in
> line 1) gets connected, but the other ones not.
>
> I always get a Connection Refused by remote host
> message. I've swapped the
> cables in two of the routers console, and I can
> still conect just through
> the 2001 port but not in 2002.
>
> Has anybody had any similar problem?. I've tried to
> clear line several
> times but it doesn't help.
>
> I'm sending the 2511 config. It's fairly simple.
>
> Thanks a lot.
>
> C�sar Enrique
>
> Current configuration:
> !
> version 11.3
> service timestamps debug datetime msec
> service timestamps log datetime msec
> service password-encryption
> !
> hostname lido_lab01-2511
> !
> enable password 7 060506324F41
> !
> username cisco password 7 094F471A1A0A
> username all password 7 03
> no ip domain-lookup
> ip host localhost 172.16.2.1
> ip host r1 2001 1.1.1.1
> ip host r2 2002 1.1.1.1
> ip host r3 2003 1.1.1.1
> ip host r4 2004 1.1.1.1
> ip host r5 2005 1.1.1.1
> !
> interface Loopback0
> ip address 1.1.1.1 255.255.255.0
> !
> interface Ethernet0
> ip address 200.44.46.105 255.255.254.0
> !
> interface Serial0
> ip address 10.16.0.6 255.255.255.252
> no fair-queue
> clockrate 250000
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface Group-Async1
> no ip address
> timeout absolute 5 0
> pulse-time 1
> group-range 1 7
> !
> ip classless
> !
> line con 0
> password 7 13061E010803
> login
> transport output none
> line 1 16
> transport input all
> transport output none
> line aux 0
> transport input all
> transport output telnet
> line vty 0 4
> password 7 094F471A1A0A
> login
> !
>
> ___________________________________
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
>
>
__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
