On Thu, 27 Jul 2000, Cisco Wave wrote:
> Dear All,
>
> We are running at 90%, and we need to use compression
> on a T1 link.
Your routers cpu is running at 90%? Or your link is at 90%? Either way,
you are in not to good of shape.........
> Which one will provide the best results : Predictor,
> Pay,load, or Stac ?
> I heard that Predictor was better, but please advice
> me.
>
> Also, do you know if there are incompatibilities
> between IOS versions ?
> Do all the following IOS use the same algorithm, are
> they compatible for compression ?
> One cisco 2620 is running 12.0(5).T1 and the other end
> is a cisco 7206 running 11.2(16)P.
>
> Is there any hardware issue, one side is using
> PowerQUICC Serial, and the other one is using M4T
> hardware ?
>
> Thank you for your help.
>
>
>
>
>
> =====
> We are NOT Cisco Inc.
>
> __________________________________________________
> Do You Yahoo!?
> Kick off your party with Yahoo! Invites.
> http://invites.yahoo.com/
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNA, CCDA [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
