Are the workstations in the .5 network setup correctly for WINS, proper domain,
ect. What is the error message you are getting when the .5 segment workstations
are trying to log on?
Scott
Alfred Saulo wrote:
> I was hoping to get feedback on configuring a 2948g-l3 switch. I've set it
> up so that the 1st port (fastethernet 1) is on my local network
> (192.168.1.x) and another port (fastethernet 20) to be on another network
> (192.168.5.x). I believe I have configured it correctly since I am now able
> to ping from a host on the 5.x network to the 1.x network and vice versa...
> however, my problem lies within being able to authenticate and eventually
> log on to the 1.x network/domain (NT server, single domain) from the 5.x
> network..... the test machine I'm using on the 5.x network is a win98 box
> with a static 5.x ip address.... gateway on that box is set to the ip
> address of the switchport for the 5.x network..... any help would be
> appreciated.....
>
> Alfred
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
