I also turn logging console of when I'm configuring routers so that I don't
see the messages. If you're connected the console more and aren't getting
and data try 'logging console'. It's also helpful to turn this off when
initially configuring a router so that you don't have all the interface up
messages, etc.
Regards,
Aaron K. Dixon
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Olden Pieterse
Sent: Saturday, July 29, 2000 11:33 AM
To: '[EMAIL PROTECTED]'
Subject: I type debug but nutthin happens !!
Hi all
I was under the impresion that if you are plugged in on the console , you
should see the debugs spewing on your screen if you do debug !
I did a debug on the serial & nothing happens ... So maybe nothing worthwile
does happen , but there must be !
Then I typed term mon . Usually thats only when you telnet hey ? And the
next thing I know here is all my debugging happening under my nose !
So if you debug and you see nothing and you feel silly , nobody would know ,
just do a term mon and it should come to you !
Hope it helps someone !
Olden Pieterse
MCP , CCNA , BCMSN , BSCN , BCRAN
Brainbench Certified CISCO Network Implementation Specialist
Technical Consultant
Mobile : +27 82 410 8621
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
