On a 2500 you should see reload requested. You can't put an image with the
router running unless it's in boot mode or you have your flash partitioned.
The 2500 runs from flash so it reloads the router in boot mode and tries to
copy the flash. Across what medium does the router reach the tftp server?
Some things don't work well in boot mode depending on the version of your
boot rom's. What version of boot rom's do you have? Can you send a sh
version?
Try manually putting your router in boot mode. ie change config-reg to
0x2101 and rebooting the router. Then ensure that you have connectivity to
your tftp server. If you do then you can load a new image without the
reload.
Regards,
Aaron K. Dixon
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
groupstudy
Sent: Saturday, July 29, 2000 9:11 PM
To: [EMAIL PROTECTED]
Subject: unable to upgrade image to 2514
Hi group
I am unable to upgrade system software from 10.3 to 12.0(3)to my 2514 for
some reason ,please help.
system memory is :4M main and 8M flash:
2514#copy tftp flash
**** NOTICE ****
Flash load helper v1.0
This process will accept the copy options and then terminate
the current system image to use the ROM based image for the copy.
Routing functionality will not be available during that time.
If you are logged in via telnet, this connection will terminate.
Users with console access can see the results of the copy operation.
---- ******** ----
Proceed? [confirm]y
System flash directory:
File Length Name/status
1 5631468 igs-j-l.103-11
[5631532 bytes used, 2757076 available, 8388608 total]
Address or name of remote host [255.255.255.255]? 20.20.20.21
Source file name? c2500-is-l_120-3.bin
Destination file name [c2500-is-l_120-3.bin]?
Accessing file 'c2500-is-l_120-3.bin' on 20.20.20.21...
Loading c2500-is-l_120-3.bin from 20.20.20.21 (via Ethernet1): ! [OK]
Erase flash device before writing? [confirm]y
Flash contains files. Are you sure you want to erase? [confirm]y
Copy 'c2500-is-l_120-3.bin' from server
as 'c2500-is-l_120-3.bin' into Flash WITH erase? [yes/no]y
=========notice below======shouldnot happen =======
%SYS-5-RELOAD: Reload requested
%FLH: c2500-is-l_120-3.bin from 20.20.20.21 to flash ...
System flash directory:
File Length Name/status
1 5631468 igs-j-l.103-11
[5631532 bytes used, 2757076 available, 8388608 total]
Accessing file 'c2500-is-l_120-3.bin' on 20.20.20.21... [failed]
%FLH: retry #1
%FLH: c2500-is-l_120-3.bin from 20.20.20.21 to flash ... (retry)
System flash directory:
File Length Name/status
1 5631468 igs-j-l.103-11
[5631532 bytes used, 2757076 available, 8388608 total]
Accessing file 'c2500-is-l_120-3.bin' on 20.20.20.21... [failed]
%FLH: Idling for 30 secs before retry #2
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
