Do you have something to simulate Frame-Relay? I did not think you could
simulate Frame-Relay going back to back with DSU's because the CO switch
sends the LMI?
You can connect (as I just learned the pinouts) the DSU's with a crossover
cable (the one cisco gives you for console will work) if it is a 56K DDS or
12 -45 on one end and 45-12 on the other (if I remeber right)
crossover for T DSU
----- Original Message -----
From: "mindiani mindiani" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, August 01, 2000 5:56 PM
Subject: Need help to setup a LAB with two CSU/DSU.
> I have three cisco 2500 routers and two CSU/DSU.
>
> I would like to setup a lab to simulate FRAME-RELAY and also ISDN clouds.
>
> My question is that possible and how should I connect the two CSU/DSU back
> to back.
> Is there any particular thing I should be aware of?
>
> Thanks.
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
