I believe that the 2901 is the same as a 5002 except that the 5002 has
modules held in with screws and the 2901 uses a different fastener (torx?).
Modules that work in the 5000 series should work in the 2901. I doubt that a
SupIII would work in a 2901 as the backplane is different.
> -----Original Message-----
> From: folks [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, August 01, 2000 9:27 AM
> To: [EMAIL PROTECTED]
> Subject: compatibility of 2902/2901 ' s chassis with 5002's module
>
>
> Hi Group
> I am about to buy a 2901 switch,but the seller said he had
> installed a
> supervisor I on a chassis marked as 2902 series and it does
> boot up without
> any pain? does any one know whether or how much the
> 2901/2902's chassis is
> compatible with 5000 series modules ,say , install a supervior III to
> 2902/2901's chassis ,possible????
> Thanks
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
