What routing protocol are you using rip, igrp, eigrp, bgp? If (igrp/eigrp)
on the secondary interface at the customer site add the bandwidth delay
xxxxx the router will determine the route....
Thanks,
Chris Boyd
Network Support
Alex Lee, Inc.
120 4th Street SW
Hickory, NC 28601
(828) 323-4103
http://www.alexlee.com
----- Original Message -----
From: "kwon, jun young" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 02, 2000 7:15 AM
Subject: May I ask you a question?
> Dears everybody.
>
> I have a question of configuring my router.
> I have 2 leased lines circuits to customer.
> I want to use one line as a primary line, the other as a backup line to a
> primary line.
> To configure the second line as a backup line, i used "the backup delay,
> backup interface serial" interface configuration command.
> but, how do i do customer's router?
> i will appreciate for your reply.
>
> Thanks.
>
>
> --
> Kwon, Jun Young
> ------------------------------------------------
> CENTRAL DATA COMMUNICATION O&M OFFICE
> Internet O&M Division, Seoul, KOREA
> TEL : +82-2-766-5901~2
> E-mail : [EMAIL PROTECTED]
>
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
