Quoting Parkhurst Page 170 "...Peer group support was added in Release 11.0, and the weight keyword was removed in Release 12.1" May I assume that you're practicing with 12.1?? I'll leave it up to you to determine if he means that you can enter the weight value without the keyword "weight" and have it work.
> -----Original Message----- > From: Cisco Nuts [mailto:[EMAIL PROTECTED] > Sent: Thursday, March 27, 2003 2:02 PM > To: [EMAIL PROTECTED] > Subject: Specifying a filter-list & wt in one cmd? [7:66339] > > > Hello, > I have seen this example on 2 Cisco links and I think that it > is wrong as it > does not work but anyone with a different experience? > Ex. > > AS300-F(config)#router bgp 300 > AS300-F(config-router)#nei 180.80.10.2 filter-list 5 weight 200 > ^ > % Invalid input detected at '^' marker. > > AS300-F(config-router)# > > > Is this a problem with 25xx's series only? > > Specifying a route-map to match the filter list and setting > the wt works but > this way?? > > Any ideas?? > > > > > _________________________________________________________________ > Add photos to your messages with MSN 8. Get 2 months FREE*. > http://join.msn.com/?page=features/featuredemail Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66346&t=66339 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
