You are correct, the card can aggregate the dandwidth as long as you dont use the second port .. you can also do this on 8 port sync/async cards...have used this for high speed frame-relay !
Andrew Larkins wrote: > > I noticed the same thing. From my understanding it works great > but the > problem comes in when the second link is connected. Once that > is done, only > then do the problems start. Something to do with the > capabilities on the WIC > itself. > > Regards > > Andrew > CCNP, CCDP, CSS1 > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: 03 April 2003 08:57 > To: [EMAIL PROTECTED] > Subject: WIC 2A/S working at speeds greater than 128kbps. > [7:66733] > > > We have a Cisco 1750 router with a WIC2A/S card > installed..According to > Cisco's documentation, the WIC card supports speeds upto > 128kbps. But i have > seen the serial port working at speeds of 250kbps.How??? Is > Cisco's > documentation wrong or am i missing something?? > > Thanks and Regards > > Simon K. Carvalho > Sr. Network Engineer > Network Solutions Ltd. , Bangalore > Email : :[EMAIL PROTECTED] > Web : www.netsol.co.in > Phone : +91 80 5535228 ext 433 > Mobile : +91 9845349843 > > "Tomorrow's Networks.Today." > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66747&t=66733 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]