>From what I understand (and have done in a similar way in my network) when the WYSE terminal sends a request for the remote host IP, and when that reaches the router, the router in trying to route the packet to the remote network (based on the routing table) will foward the packet to the ISDN interface. When the ISDN interface realises that there is a packet for the remote network, it will dial out automatically using the phone number and authentication credentails.
No need for any config on the WYSE terminal. BR Bosco -----Original Message----- From: maine dude [mailto:[EMAIL PROTECTED] Sent: Thursday, June 05, 2003 4:05 PM To: [EMAIL PROTECTED] Subject: VPN authentication [7:70186] Hi, I hope that someone can help me with this, let me explain. We have a remote site A with isdn dialup to the coporate vpn concentrator we have a dumb box aka WYSE terminal ie thin client this is connected to a switch the switch is connected to a 1700 router with wic bri we want it to dial on demand and connect fully so the user does not see any authentication requests the user request should be done automatically but i cant find how to do that via config unless* brainstorming here* the type should be network instead of client ??? Thanks in advance, Dj --------------------------------- Yahoo! Plus - For a better Internet experience Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70189&t=70186 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
