""Brad Ellis"" wrote in message news:[EMAIL PROTECTED] > Technically, all you need is the emi image, and tftp it to the switch. Keep > in mind, that the 3550 will not erase the flash before xfer'ing the file > over, so you'll need to take that into consideration and either erase the > current flash, or config it to boot off the new image (otherwise it will > still use the SMI image even though the EMI image is on there as well).
This is one case where it is absolutely essential to RTFM, and understand it, prior to attmpting an upgrade. And it's not like the FM is particularly clear, with several excellent examples. But you are correct that copy tftp flash is not the way to go. > > thanks, > -Brad Ellis > CCIE#5796 (R&S / Security) > Network Learning Inc > [EMAIL PROTECTED] > www.ccbootcamp.com (cisco training) > wrote in message > news:[EMAIL PROTECTED] > > Hi group, > > > > I just got a cisco 3550 smi switch, could someone let me know how to > > upgrade the switch to emi ? > > > > Thank you very much... > > > > > > Philip Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70237&t=70072 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]