U?ytkownik ""Bruce Fyfe"" napisa3 w wiadomo6ci news:[EMAIL PROTECTED] > I was trying to find out what the proper procedure for upgrading the PDM > on a PIX box is. The documentation on Cisco's site cover installation > (including on an existing box) but it doesn't seem to address > specifically the upgrade. Can I simply send the binary via TFTP? The > Cisco documentation doesn't seem to specify whether it will affect the > firewall config or not. I wouldn't assume that it would but we all know > what we get when we assume.... > Od: "Mariusz T." Temat: Re: Upgrading PDM on a PIX firewall [7:70261] Data: 6 czerwca 2003 16:34
U?ytkownik ""Bruce Fyfe"" napisa3 w wiadomo6ci news:[EMAIL PROTECTED] > I was trying to find out what the proper procedure for upgrading the PDM > on a PIX box is. The documentation on Cisco's site cover installation > (including on an existing box) but it doesn't seem to address > specifically the upgrade. Can I simply send the binary via TFTP? The > Cisco documentation doesn't seem to specify whether it will affect the > firewall config or not. I wouldn't assume that it would but we all know > what we get when we assume.... > You type copy ? and what you get is: copy tftp[:[[//location][/pathname]]] flash[:[image | pdm]] so you can assume, that copy tftp: flash:pdm will do the job... and it won't affect the pix configuration, why should it? It's just a configuration editing software, just like configmaker, only located on the pix flash for your (in)convenience HTH Mariusz Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70268&t=70261 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
