Guys,
In a FXO gateway scenario can we use a destination-pattern of .T under the
FXO port on the gateway so that we can call phone numbers less than 10
digits or more.
THE configuration is like this
Cisco 2600 (FXO) ------------------------Cisco 2600 ( FXS)
|
|
|
|
Telco PBX
I have a Telco line coming into Cisco 2600 with FXO and want the dial tone
at the other 2600 with FXS ports.I have seen the CCO documentation of the
application but the problem is calling phone numbers which are less than 10
or more than 10 digits.
Any comments,
neil
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70271&t=70271
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
