URT is supposed to allow mapping of vlan's to a swithcport based on user (I've never used though). http://www.cisco.com/en/US/products/sw/secursw/ps2136/index.html
At a recent cisco event one of the cisco se's mentioned that Cisco may be URT with 802.1x once all the kinks are worked out so I wouldn't be surprised if URT goes EOS soon. On Mon, Jun 02, 2003 at 01:15:14AM +0000, - jvd wrote: > Joseph, > > I may be wrong, but I think dynamic VLANS can only by assigned according to > the MAC address (I can't believe Cisco doesn't make dynamic VLAN assignment > also based on the IP, port, etc. !!??) In any case the feature you need to > use is VMPS (VLAN membership policy server). > http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_configuration_guide_chapter09186a008007f2ec.html#12998 > > Please post again if you find contrary information, because I would like to > learn more on this... > > Regards, -- ------------------------------------------------------------ Patrick Aland [EMAIL PROTECTED] Network Administrator Voice: 386.822.7217 Stetson University Fax: 386.822.7367 ------------------------------------------------------------ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=69989&t=69873 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]