You will need to configure both a dialer map and a channel group. The channel group will assign the pri timeslots to serial interfaces.
Cheers ""Valeri Marinski"" wrote in message news:[EMAIL PROTECTED] > Hi, > > i'd like to configure a PRI to PRI DIALUP connection between two routers > using all the available channels but i get only 1 or 2 channels up what is > the problem?!? > > Is it the right way to configure: > > pri-group timeslots 1-31 > > and than to use a "Dialer" interface to "dialer map ip .... " > > or should i for a channel group with: > > channel-group 0 timeslots 1-31 > > i tried but i couldn't bind the Serial1/0:0 interface that was created by > this configuration to any dialer > --- is it only for cable-to-cable connection ?? > > because i have to dial a number for this approach. > > > thanks in advance for any comments or recommendations Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70142&t=70134 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
