There is a lot of confusion about running dlsw+ between two routers. For example, If a there is a peer relationship between r1 and r2. r1 config, dlsw local-peer peer-id 1.1.1.1 dlsw remote-peer 0 tcp 2.2.2.2 r2 config, dlsw local-peer peer-id 2.2.2.2 dlsw remot-peer 0 tcp 1.1.1.1 both r1 and r2 have ethernet host. host on r1's mac-address is 1234.4321.0001 Now I want r2 to reach an ethernet host only. my statement would be on r1 dlsw icannreach mac-address 1234.4321.0001 mask ffff.ffff.ffff dlsw icanreach mac-exclusive. Is the above statement correct? or will I have to do a bit-swapping since the ehternet only understands cononial format, and dlsw understands non-cononial format, then it should be like that dlsw icanreach mac-address 483c.c383.0080 mask ffff.ffff.ffff dlsw icanreach mac-exculsive. Please confirm when to do bitswapping in pure ethernet enviroment. Thanks, Teza
_______________________________________________ Join Excite! - http://www.excite.com The most personalized portal on the Web! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70154&t=70154 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]