The proper microcode should be included with each release of IOS. In very special circumstances a special microcode release may be needed to fix a specific bug. TAC would provide that to you via a special download. So my guess is that if your IOS doesn't have the required microcode then it is not the correct version to support the PA in that VIP2 card. 1) What is in slot1? 2) Has it ever worked? In this router or another?
> -----Original Message----- > From: Lamy Alexandre [mailto:[EMAIL PROTECTED] > Sent: Friday, June 06, 2003 5:10 PM > To: [EMAIL PROTECTED] > Subject: 7505 problem, microcode? [7:70288] > > > Is there a good Samaritan who can help me? > > I am looking for a microcode for my 7505 router. > > I have hundreds IOS images, but there is a microcode missing. > > I think that it is cip28.12.bin > > take a look at this problem: > > ------------------------------------------------ > > sho diagbus > Slot 0: > Physical slot 0, ~physical slot 0xF, logical slot 0, CBus 0 > Microcode Status 0x4 > Master Enable, LED, WCS Loaded > Board is analyzed > Pending I/O Status: None > EEPROM format version 1 > FEIP2 controller, HW rev 2.11, board revision E0 > Serial number: 17934563 Part number: 73-1684-04 > Test history: 0x00 RMA number: 00-00-00 > Flags: cisco 7000 board; 7500 compatible > > EEPROM contents (hex): > 0x20: 01 20 02 0B 01 11 A8 E3 49 06 94 04 00 00 00 00 > 0x30: 70 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 > > Slot database information: > Flags: 0x4 Insertion time: 0x2C68 (00:33:37 ago) > > Controller Memory Size: 32 MBytes DRAM, 2048 KBytes SRAM > > PA Bay 0 Information: > Fast-Ethernet PA, 1 ports, 100BaseTX-ISL > EEPROM format version 1 > HW rev 1.04, Board revision B0 > Serial number: 15811504 Part number: 73-2570-02 > > PA Bay 1 Information: > Fast-Ethernet PA, 1 ports, 100BaseTX-ISL > EEPROM format version 1 > HW rev 1.04, Board revision B0 > Serial number: 15810930 Part number: 73-2570-02 > > --Boot log begin-- > > Cisco Internetwork Operating System Software > IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(16), RELEASE > SOFTWARE (fc3) > Copyright (c) 1986-2003 by cisco Systems, Inc. > Compiled Thu 06-Mar-03 23:12 by pwade > Image text-base: 0x60010930, data-base: 0x603E0000 > > > --Boot log end-- > > Slot 1: > Physical slot 1, ~physical slot 0xE, logical slot 1, CBus 0 > Internal Instruction Error, Microcode Status 0x5 > Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, > WCS Loaded > Board is disabled wedged > Pending I/O Status: None > EEPROM format version 1 > VIP2 R5K controller, HW rev 2.03, board revision A0 > Serial number: 18571089 Part number: 73-2167-06 > Test history: 0x00 RMA number: 00-00-00 > Flags: cisco 7000 board; 7500 compatible > > EEPROM contents (hex): > 0x20: 01 1E 02 03 01 1B 5F 51 49 08 77 06 00 00 00 00 > 0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 > > Slot database information: > Flags: 0x291 Insertion time: 0x2C68 (00:33:43 ago) > > VIP Controller Memory Size: Unknown > > 2 crashes since restart. > Last crash context (*Jun 06 2003 06:01:07): > $0 : 00000000, AT : 00000000, v0 : 00000000, v1 : 00000000 > a0 : 00000000, a1 : 00000000, a2 : 00000000, a3 : 00000000 > t0 : 00000000, t1 : 00000000, t2 : 00000000, t3 : 00000000 > t4 : 00000000, t5 : 00000000, t6 : 00000000, t7 : 00000000 > s0 : 00000000, s1 : 00000000, s2 : 00000000, s3 : 00000000 > s4 : 00000000, s5 : 00000000, s6 : 00000000, s7 : 00000000 > t8 : 00000000, t9 : 00000000, k0 : 00000000, k1 : 00000000 > gp : 00000000, sp : 00000000, s8 : 00000000, ra : 00000000 > EPC : 00000000, ErrorEPC : 00000000, SREG : 00000000 > Cause 00000000 (Code 0x0): Interrupt exception > > > --Boot log begin-- > > Cisco Internetwork Operating System Software > IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(16), RELEASE > SOFTWARE (fc3) > Copyright (c) 1986-2003 by cisco Systems, Inc. > Compiled Thu 06-Mar-03 23:12 by pwade > Image text-base: 0x60010930, data-base: 0x603E0000 > > > PA Bay 1 Upstream PCI-PCI Bridge, Handle=1 > DEC21050 bridge chip, config=0x0 > (0x00):dev, vendor id = 0x00011011 > (0x04):status, command = 0x42800147 > Signaled System Error on primary bus > (0x08):class code, revid = 0x06040002 > (0x0C):hdr, lat timer, cls = 0x00010000 > (0x18):sec lat,cls & bus no = 0x00020200 > (0x1C):sec status, io base = 0x0380F0A0 > Data Parity Detected on secondary bus > (0x20):mem base & limit = 0x03F00200 > (0x24):prefetch membase/lim = 0x0000FE00 > (0x3C):bridge ctrl = 0x00030000 > (0x40):arb/serr, chip ctrl = 0x00000000 > (0x44):pri/sec trgt wait t. = 0x00000000 > (0x48):sec write attmp ctr = 0x00FFFFFF > (0x4C):pri write attmp ctr = 0x00FFFFFF > > > === Flushing messages (00:00:05 UTC Mon Mar 1 1993) === > > Buffered messages: > Queued messages: > 00:00:02: %VIP-3-SVIP_PMAERROR_INTERRUPT: A PMA Error occured. > 00:00:05: %VIP-3-PCI_BUS0_SYSERROR: PCI bus 0 system error. > 00:00:05: %VIP-3-PCI_BUS2_PARITYERROR: PCI bus 2 parity > error.PMA error > register > = 0200002000010000 > PCI SERR > PCI master address = 2000020 > $0 : 00000000, AT : 34210A00, v0 : 00000001, v1 : 00000000 > a0 : 60BC4820, a1 : 52000000, a2 : 60461C98, a3 : 00000040 > t0 : 00000010, t1 : 3400C101, t2 : 3400C100, t3 : FFFF00FF > t4 : 60105710, t5 : 000000F8, t6 : 609AC9A4, t7 : 609AC9A0 > s0 : 52000028, s1 : 00000036, s2 : 60461CC0, s3 : 00000000 > s4 : 60BC4820, s5 : 00000001, s6 : 60BC4930, s7 : BABEBABE > t8 : 609AC9E0, t9 : 00000000, k0 : 30410000, k1 : 30410000 > gp : 6088AC40, sp : 609B58B8, s8 : 60500000, ra : 60207310 > EPC : 60206E88, ErrorEPC : 800086B8, SREG : 3400C103 > Cause 00000000 (Code 0x0): Interrupt exception > > -Traceback= 60206E88 60207310 6020880C 602BD29C 60208950 > 602BADF4 602BAF18 > 602B7 > B6C 600FAA14 60038944 60038B70 600D8050 600D803C > --Boot log end-- > > Slot 2: > Physical slot 2, ~physical slot 0xD, logical slot 2, CBus 0 > Microcode Status 0x4 > Master Enable, LED, WCS Loaded > Board is analyzed > Pending I/O Status: None > EEPROM format version 1 > VIP2 R5K controller, HW rev 2.02, board revision C0 > Serial number: 12677313 Part number: 73-2167-05 > Test history: 0x00 RMA number: 00-00-00 > Flags: cisco 7000 board; 7500 compatible > > EEPROM contents (hex): > 0x20: 01 1E 02 02 00 C1 70 C1 49 08 77 05 00 00 00 00 > 0x30: 60 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 > > Slot database information: > Flags: 0x4 Insertion time: 0x2C68 (00:33:49 ago) > > Controller Memory Size: 32 MBytes DRAM, 4096 KBytes SRAM > > PA Bay 0 Information: > POS PA, 1 port, PA-POSDW-SM > EEPROM format version 1 > HW rev 1.31, Board revision B0 > Serial number: 11029676 Part number: 73-2107-07 > > --Boot log begin-- > > Cisco Internetwork Operating System Software > IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(16), RELEASE > SOFTWARE (fc3) > Copyright (c) 1986-2003 by cisco Systems, Inc. > Compiled Thu 06-Mar-03 23:12 by pwade > Image text-base: 0x60010930, data-base: 0x603E0000 > > > --Boot log end-- > > Slot 4: > EEPROM format version 1 > Route/Switch Processor 2, HW rev 1.04, board revision K0 > Serial number: 12670230 Part number: 73-1324-05 > Test history: 0x00 RMA number: 00-00-00 > Flags: cisco 7000 board; 7500 compatible > > EEPROM contents (hex): > 0x20: 01 0F 01 04 00 C1 55 16 49 05 2C 05 00 00 00 00 > 0x30: A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > Slot 31 (virtual): > EEPROM format version 1 > Chassis Interface, HW rev 1.01, board revision C0 > Serial number: 17561851 Part number: 73-1306-02 > Test history: 0x00 RMA number: 00-00-00 > Flags: cisco 7000 board > > EEPROM contents (hex): > 0x20: 01 10 01 01 01 0B F8 FB 49 05 1A 02 00 00 00 00 > 0x30: 60 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00 > ------------------------------------------------ > > sho microcode > Microcode bundled in system > > Card Microcode Target Hardware Description > Type Version Version > ---- --------- --------------- ----------- > EIP 20.6 1.x EIP version 20.6 > FIP 20.4 2.x FIP version 20.4 > TRIP 20.2 1.x TRIP version 20.2 > AIP 20.18 1.x AIP version 20.18 > FSIP 20.10 1.x FSIP version 20.10 > HIP 20.2 1.x HIP version 20.2 > MIP 22.3 1.x MIP version 22.3 > FEIP 20.8 2.x FEIP version 20.8 > VIP2 22.20 2.x VIP2 version 22.20 > RSP2 20.0 1.x RSP2 version 20.0 > > Microcode flash default images > > Card Microcode > Type Version device:filename > ---- --------- ------------------- > CIP 28-12 slot0:cip28-12 - Not present > > ------------------------------------------------------------ > > 00:37:21: %VIP2 R5K-3-MSG: slot1 > VIP-3-SVIP_PMAERROR_INTERRUPT: A PMA Error > occu > red. > 00:37:21: %VIP2 R5K-3-MSG: slot1 VIP-3-PCI_BUS0_SYSERROR: PCI > bus 0 system > error > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70323&t=70288 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
