you are using: dialer map ip 196.1.1.2 name RouterB broadcast 21 and ppp authentication chap
so if you rename the routers you have 2 options: either use "ppp chap hostname and password" under the bri interfaces because the routers send the hostnames by default in ppp authentication or change the names in dialer-map after changing the router names as well regards Devvvv ----- Original Message ----- From: "Iwan Hoogendoorn" To: Sent: Sunday, June 08, 2003 11:32 AM Subject: Can't ping anymore if i rename routernames [7:70330] > I am connected to the TS //2511// > > On ports 5 and six I connected 2 ISDN routers //2503// > The routers are called RouterA and Router B > > If I rename the routers to R5 and R6 I cant ping them anymore... > > If I rename them back again I can ping them...the line comes up and I can > ping them... > > Can someone help me with this STRANGE thing? > > Thank You.... > > > > /2503(RouterA) (want to rename to R5) > PC --> TS(2511) > \2503(RouterB) (want to rename to R6) > > This are my configs: > > //////////////////2511///////////////////////// > ! > version 11.2 > service timestamps log uptime > no service udp-small-servers > no service tcp-small-servers > ! > hostname 2511 > ! > no ip domain-lookup > ip host R1 2001 1.1.1.1 > ip host R2 2002 1.1.1.1 > ip host R3 2003 1.1.1.1 > ip host R4 2004 1.1.1.1 > ip host R5 2005 1.1.1.1 > ip host R6 2006 1.1.1.1 > ip host R7 2007 1.1.1.1 > ip host R9 2008 1.1.1.1 > ip host SW3 2009 1.1.1.1 > ip host SW2 2010 1.1.1.1 > ip host R10 2011 1.1.1.1 > ! > interface Loopback0 > ip address 1.1.1.1 255.255.255.255 > ! > interface Ethernet0 > ip address 2.2.2.2 255.255.255.0 > ! > interface Serial0 > no ip address > ! > no ip classless > ! > line con 0 > line 1 16 > no exec > transport input all > line aux 0 > line vty 0 4 > login > ! > end > > ///////////RouterA////////////// > ! > version 11.2 > no service udp-small-servers > no service tcp-small-servers > ! > hostname RouterA > ! > enable password cisco > ! > username RouterB password 7 030752180500 > isdn switch-type basic-net3 > ! > interface Serial0 > no ip address > ! > interface BRI0 > ip address 196.1.1.1 255.255.255.0 > encapsulation ppp > dialer idle-timeout 90 > dialer map ip 196.1.1.2 name RouterB broadcast 21 > dialer-group 1 > no fair-queue > ppp authentication chap > ppp multilink > no shutdown > ! > no ip classless > dialer-list 1 protocol ip permit > ! > line con 0 > password cisco > login > line aux 0 > line vty 0 4 > login > ! > end > > ///////////RouterB////////////// > ! > version 11.2 > service timestamps debug datetime localtime > no service udp-small-servers > no service tcp-small-servers > ! > hostname RouterB > ! > enable password cisco > ! > username RouterA password 7 030752180500 > isdn switch-type basic-net3 > ! > interface BRI0 > ip address 196.1.1.2 255.255.255.0 > encapsulation ppp > dialer idle-timeout 90 > dialer map ip 196.1.1.1 name RouterA broadcast 20 > dialer-group 1 > no fair-queue > ppp authentication chap > ppp multilink > no shutdown > ! > no ip classless > dialer-list 1 protocol ip permit > ! > line con 0 > line aux 0 > line vty 0 4 > password cisco > login > ! > end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70334&t=70330 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
