you can connect to a serial if that serial has async capability... do "sh ver " in your router
like: sabena>sh ver .. cisco 2520 (68030) processor (revision M) with 14336K/2048K bytes of memory. .. 2 Low-speed serial(sync/async) network interface(s) ==> you see this serial interface can work in both sync and async... however the default is sync... so make that corresponding interface async with the "physical layer async" command.. this command will create a "line x" as well... Regards Devvvv ----- Original Message ----- From: "Shane Stockman" To: Sent: Monday, June 09, 2003 1:03 PM Subject: Modem question [7:70392] > Is there a way to connect a modem to a serial or ethernet port for direct > telnet to a remote router with a modem ?. I have a 2507 and 2522. > > Thanks > > _________________________________________________________________ > Download MSN Messenger 5.0. http://messenger.msn.co.za/ It's free! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70397&t=70392 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
