Hey Group I have a Cisco 3005 series concentrator box configured to run between my Externel router and Checkpoint firewall such that:
INTERNET Router -------> VPN 3005 --------> Checkpoint------LAN This is one segment of my network. On another segment of the network I have a Juniper M20 router with an encapsulation card that is connected to the internet via a different ISP. I have sucessfully established a 3DES IPSec tunnel between these too although I must admit that the freakin GUI interface of the VPN3005 sucks big time and is confusing compared to the ultra cool Juniper CLI. It took me a while to explore the damn hidden options in the GUI! The problem is that although the tunnel is established, no data can pass through it! From what I have heard from a reliable source, there is some compatibility issue relating to the frame size and packet fragmentation when it arrives at the Juniper Interface. Juniper says that it's router's are designed for a high amount of Internet traffic and that packet fragmentation is not something a gateway router should be bothered about. However, they have suggested certain Cisco boxes like the 3662 that allows for packet fragmentation and other such stuff.... Any of you guys wanna shed some like on this and tell me how I can make the 3005 talk to the M20?? Thanks a ton Cheers Bosco Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70444&t=70444 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
