e1/r2 can only accept analog meanwhile isdn (PRI) can accept both
analog/digital since
they use different signalling, on-hook/off hook bits ,etc...
carlos
-----Original Message-----
From: lee <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Sunday, August 06, 2000 1:05 AM
Subject: E1/R2 Signaling
>Hi all, I've configured an E1/R2 on AS5300 for a customer. Actually this
>E1/R2 is use for WAP(Wireless Application Protocol) testing, which is using
>Nokia 7110 WAP cell phone to dial to the E1/R2 line. Basically Nokia 7110
>WAP have 2 kinds of call type, first one is 'analog' and the second one is
>'ISDN'. I managed to use 'analog' call type to dial in to the E1/R2 line
but
>not 'ISDN'.
>Can I assume that the E1/R2 line cannot accept 'ISDN' call ???
>I've checked with the Cisco TAC engineer about this issue, but they
couldn't
>conform to me whether E1/R2 can accept 'ISDN' call or not.
>I hope someone can give me the answer on this.
>
>Thanks in advance.
>
>regard,
>lee
>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
