Somehow I have forgotten how to do math... Can anyone explain to me or point to a doc on figuring out the percentage for the below lab.
Enable traffic shaping on int serial 0/0 as follows: Shape Telnet and ICMP traffic to 15%25 of bandwidth Shape FTP traffic to 50%25 of bw Shape all remianing traffic to 35%25 of bw. Remember the total link bw is 64 kbps on this interface. The burst size should 1/8 of the bit rate cfg'd, no excess burst should be allowed. The answer from the lab help are, below can anyone tell me how the number 9600, 32000 and 22400 were arrived at? I can figure out the 1/8th part 1200, 4000 and 2800, but somehow can't remember how to get the original percentage.. traffic-shape group 101 9600 1200 1200 traffic-shape group 102 32000 4000 4000 traffic-shape group 103 22400 2800 2800 Thanks. --------------------------------- Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70861&t=70861 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
