You could use traffic-shape command
interface serial 1 traffic-shape group 101 128000 16000 8000 You must calculate the bit-rate that is suitable for your medium. The group 101 relates to access group. In your case you can have all networks Access-list 101 permit 0.0.0.0 0.0.0.0 eq 135 You could as well just limit the hosts that are causing the problem. But overall you should diagnose if they are compromised hosts. Cheers, Jamie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marakalas Sent: June 18, 2003 1:18 PM To: [EMAIL PROTECTED] Subject: Liming netbios connections [7:70883] Hi all I have a problem on the network where some machines a establishing a lot of netbios connections on the network and almost consuming all the bandwidth. How do I configure the ingress interface to set the limit on the number of connections that each machine can have? Your urgent response will be highly appreciated. This might be related to the virus. __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70896&t=70883 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]