At 11:48 PM 6/18/2003 +0000, Xy Hien Le wrote: >Any one know how to reverse this mistake or setting this switch to boot with >the original IOS which still install in the flash.
Connect to console, power-cycle the switch, and send break signal right after the switch starts to boot. This should send you to rommon, where you can set the BOOT variable to the image you want to load (BOOT=). Then do a 'sync' in order to save the new BOOT variable, reload, end you should be all set. Thanks, Zsombor Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70900&t=70892 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
