Backbone 3550 router has 3 vlans with Intervlan routing: Vlan10 192.168.10.1Vlan20 192.168.20.1Vlan30 192.168.30.1 Vlan 30 connects to a WAN Router's E0 192.168.30.2 Other side of the WAN router: I have a same setup VLAN10 192.168.40.1VLAN20 192.168.50.1VLAN30 192.168.60.1 VLAN 30 connects to the other WAN Router's E0 192.168.60.2 The serial link between 2 routers is on subnet 192.168.100.0/24 From the second WAN router I can ping all the vlans interfaces except 192.168.10.1. Although I can ping 192.168.10.1 from the Backbone switch behind this router, but can't ping the address from the router itself. When I do a regular ping from the router obviously it will source from the Serial Interface and that is where the problem is. When I do a extended ping from the router and then source it from the Ethernet it will ping fine. Both Router and the far backbone switch do see the routes of each other. Really frustrated why it's happening.
_______________________________________________ Join Excite! - http://www.excite.com The most personalized portal on the Web! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71036&t=71036 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]