I always use Premetric. Is there a difference as far as exam go?. Reza ""Dimitrije"" wrote in message news:[EMAIL PROTECTED] > Not in a good mood because I got a 703 on this test today (732 passing). > Hopefully, a little more review will get me over the hump. > > However, I did have a frustrating experience with one of the new router > simulation questions - I wonder if anyone had a similar experience. I'll > keep > it general as to not disclose specific question contents. The problem was to > configure serial 0/0 on the router thru the console port: > Router>enable > password: cisco > Router#config t > Router(config)#interface serial 0/0 > ^ > % Invalid input detected at '^' marker. > Router(config)# > I tried literally about two-dozen permutations & abbreviations of the above > command and the simulator would never let me into interface config mode. I > even > used help and tab and ?. I verified that I was in privileged mode and config > mode. I even checked if I was connected to the correct router. > I either did something blatantly wrong (which I guess is possible), or the > simulator went wack-o on me (less likely, but I believe still possible). > After 5 minutes, I gave up and moved on. The unfortunate part was I knew > exactly how to configure the interface, but I was not able to enter interface > config mode to complete the task. Thanks for letting me blow off some > steam! > dj
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71828&t=71765 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]